AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-203
Tightening Torque Specification
Fastening part
Tightening torque
N•m kg-m lb-ft
A/T fluid drain plug 17 1.7 12.5
Output shaft speed sensor bolt 13 1.3 9.5
Input shaft speed sensor bolt 5.5 0.55 4.0
Transaxle case plug 7.5 0.75 5.5
Solenoid valve bolt 11 1.1 8.0
Rear cover plug 7.5 0.75 5.5
Transaxle and engine fastening bolt and nut 85 8.5 61.5
Drive plate to torque converter bolt 19 1.9 14.0
Lower stiffener bolt 55 5.5 40.0
Starter motor bolt and nut 50 5.0 36.5
Oil pump subassembly bolt 10 1.0 7.5
Valve body bolt 11 1.1 8.0
Final gear bolt 78 7.8 56.5
Reduction drive gear nut (Reference) 100 10.0 72.5
Rear cover bolt 25 2.5 18.0
Fluid reservoir LH plate bolt 10 1.0 7.5
Manual detent spring bolt 10 1.0 7.5
Parking lock pawl bracket bolt 7.5 0.75 5.5
Oil pump assembly bolt 25 2.5 18.0
Torque converter housing bolt 33 3.3 24.0
Torque converter housing plug 7.5 0.75 5.5
Lubrication tube clamp bolt 5.5 0.55 4.0
Fluid reservoir RH plate bolt 5.5 0.55 4.0
Valve body harness connector bolt 5.5 0.55 4.0
Oil pan bolt 7.0 0.7 5.0
Oil strainer bolt 10 1.0 7.5
Fluid outlet union 25 2.5 18.0
Fluid cooler pipe flare nut 35 3.5 25.5
Fluid cooler pipe bolt 22 2.2 16.0
Fluid cooler pipe bracket bolt 10 1.0 7.5
Fluid filler tube bolt 10 1.0 7.5
Transmission range sensor lock nut 7 0.7 5.0
Transmission range sensor bolt 5.5 0.55 4.0
Manual select lever nut 13 1.3 9.5
Engine mounting LH bracket bolt 55 5.5 40.0
Harness bracket bolt 23 2.3 17.0
Select cable clamp bolt 10 1.0 7.5
To Next Page
Loading...
