2
INSIGHT Software
Operation
Thermo Scientific Evolution 200 Series User Guide 95
3. Click OK.
The found crossings have labels, and the crossing results are listed at the right.
The settings are saved in the workbook and will be used for measuring samples with
Result on the Measurement tab set to Value Level.
Related Topics
Smoothing Scan Data
Converting Scan Data to a Derivative
Converting Scan Data to Other Units
Adding Two Scan Spectra
Subtracting a Scan Spectrum
Ratioing Two Scan Spectra
Averaging Scan Spectra
Adding, Subtracting, Multiplying or Dividing Scan Data by a Factor
Finding Peaks in Scan Data
Results table
Crossing label
To Next Page
Loading...
