29
Temperature Probe
Thermo Scientific Evolution 200 Series User Guide 439
2. Use tweezers or a pointed tool to remove the small O-ring from the end of the liner.
3. Press the new O-ring fully into the liner.
The O-ring must remain in place when you turn the liner upside down.
4. Use the screw to insert the liner back into the stopper (press to secure the O-ring).
5. Remove the screw from the liner.
Y To replace the gaskets on the square stopper
1. Use tweezers or a pointed tool to remove the gaskets.
2. Stretch each new gasket onto the stopper and press it into the groove.
Related Topics
Routine Maintenance
Cleaning Temperature Probes
Maintenance
To Next Page
Loading...
