2
INSIGHT Software
Operation
Thermo Scientific Evolution 200 Series User Guide 57
Advanced standard curve
Feature Description
Standard Curve Equation Equation used to quantify samples, written in a form similar to
that used in a command script language, with constants,
mathematical functions, etc. (See Operations and Functions for
definitions of operations and functions.) All functions are not
case-sensitive. Spaces are not allowed between a function name
and “(”.
For this Quant type the equation defines the value for the Y-axis
of the calibration curve.
Instructions:
Y To use a predefined equation
1. Click Select.
2. Select the desired equation and click OK.
The available equations depend on the Formulas & Units
tab settings in Options.
Y To define an equation
1. Click Build.
2. To enter an equation in its entirety, set Equation type to
User defined and type the equation. To use a provided
equation, select it and enter values for the variables.
The available equations depend on the Formulas & Units
tab settings.
3. Click OK.
Component name Component to quantify.
Unit Component concentration unit. The available units depend on
the Formulas & Units tab settings in Options.
Calculate additional
results
See Calculate additional results above.
To Next Page
Loading...
