2
INSIGHT Software
Operation
58 Evolution 200 Series User Guide Thermo Scientific
Advanced without standards
Related Topics
Operations and Functions
Quant
Type Tab for Quant
Standards Tab for Quant
Instrument Tab for Quant
Samples Tab for Quant
Accessories Tab for Quant
Formulas and Units Tab
Quantifying Sample Data
Performing a Quantitative Analysis
Operations and Functions
The tables below describe the operations and functions usable in Quant equations specified
on the Measurement tab. Arithmetic operations (including functions) are performed first,
followed by comparison operations, and finally logical operations.
Feature Description
Single Result Equation See Standard Curve Equation above for instructions.
For this Quant type the equation is used to obtain a single
concentration result (without using standards).
Component name Component to quantify.
Unit Component concentration unit. The available units depend on
the Formulas & Units tab settings in Options.
Calculate additional
results
See Calculate additional results above.
Note The operators, arguments and functions are not case-sensitive.
To Next Page
Loading...
