Xerox PHASER 6250 - Page 94

3-12 Phaser 6250 Color Laser Printer Service Manual
Exit Sensor Sensor is: OFF
Sensor is: ON
Actuate/de-actuate the Exit
Actuator (PL8.1.7) located in the
Fuser to toggle the sensor state.
Duplex Sensor Sensor is: OFF
Sensor is: ON
Actuate/de-actuate the Duplex
Actuator (PL6.1.13) located on the
Chute Assembly Out to toggle the
sensor state.
Full Stack
Sensor
Sensor is: OFF
Sensor is: ON
Actuate/de-actuate the Output Tray
Full Actuator (PL6.1.4) at the
output tray to toggle the sensor
state.
Black Toner (K)
Low
Cyan Toner (C)
Low
Magenta Toner
(M) Low
Yellow Toner
(Y) Low
Toner is Low
Toner is NOT Low
Displays current state of the
sensor.
Black Toner
Cartridge
Present
Cyan Toner
Cartridge
Present
Magenta Toner
Cartridge
Present
Yellow Toner
Cartridge
Present
Sensor is: OFF
Sensor is: ON
Toggle the Toner Cartridge In
switch (PL 10.1.22) for the
appropriate color to change the
sensor state.
Toner Cartridge is in the LOCKED
position.
Toner Cartridge is in the
UNLOCKED position.
Black Toner
CRUM Sensor
Cyan Toner
CRUM Sensor
Magenta Toner
CRUM Sensor
Yellow Toner
CRUM Sensor
Sensor is: OFF
Sensor is: ON
Remove the appropriate toner
cartridge and depress the Toner
Cartridge In switch (PL 10.1.22) to
change the sensor state.
Toner Cartridge is in the LOCKED
position.
Toner Cartridge is in the
UNLOCKED position.
Test Front Panel Display and Test Definition