Yamaha F75F - Power Unit

0
1
2
3
4
5
6
7
8
9
1
0
A
Power unit
Power unit (check and adjustment) .................................. 7-1
Checking the compression pressure .......................................... 7-1
Checking the oil pressure...........................................................
7-1
Checking the pulser coil air gap
................................................. 7-2
Checking the valve clearance
.................................................... 7-2
Adjusting the valve clearance
..................................................... 7-5
Power unit assembly.......................................................... 7-6
Removing the power unit............................................................ 7-7
Installing the power unit..............................................................
7-9
Flywheel magneto and timing belt.................................. 7-12
Removing the flywheel magneto .............................................. 7-13
Removing the timing belt and sprocket .................................... 7-13
Checking the timing belt and sprocket
..................................... 7-13
Installing the sprocket and timing belt
...................................... 7-13
Installing the stator assembly
................................................... 7-14
Installing the flywheel magneto ................................................ 7-15
Starter motor .................................................................... 7-16
Rectifier/regulator, ignition coil, and spark plug
........... 7-17
Checking the spark plug........................................................... 7-18
Installing the ignition coil, rectifier/regulator, and spark plug
.... 7-18
Wire harness..................................................................... 7-19
Wire harness (tiller handle model)............................................ 7-19
Wire harness (remote control model)
....................................... 7-20
Installing the wire harness
........................................................ 7-21
Fuse box............................................................................ 7-22
Throttle control lever
....................................................... 7-23
Installing the throttle control lever............................................. 7-24
Oil cooler........................................................................... 7-25
Checking the thermostat .......................................................... 7-26
Checking the crankcase cover anode ...................................... 7-26
Installing the crankcase cover
.................................................. 7-26