Yamaha F75F - Page 187

Cylinder head
7-29
3. Install:
• Plu
g gasket
• Plu
g
4. Install:
• Anode (to the anode screw)
• Anode screw (to the anode plug)
• O-ring (to the anode plug)
• Anode plug
5. Install:
• Hos
e
• Plastic tie
• Pla
te
• Pla
te screw
• Cylinder
head cover gasket (to the
cylinder head cover)
• Cylinder head cover
• Cylinder head cover bolt
• Grommet
• O-ring (to the oil filler cap)
• Oil fil
ler cap
Cylinder head bolt (M10) “1” [1]–
[10]
1st: 26 N·m (2.6 kgf·m, 19 lb·ft)
2nd: 46 N·m (4.6 kgf·m, 34 lb·ft)
3rd: 180
Cylinder head bolt (M8) “2” [11]–
[13]
1st: 14 N·m (1.4 kgf·m, 10 lb·ft)
2nd: 28 N·m (2.8 kgf·m, 21 lb·ft)
Plug
23 N·m (2.3 kgf·m, 17 lb·ft)
Anode plug
18 N·m (1.8 kgf·m, 13 lb·ft)
T
R
.
.
New
T
R
.
.
New
T
R
.
.
New
New
New