2 Installation and Commissioning, IRC5
2.7.2. Connecting a USB memory to the computer unit
993HAC021313-001 Revision: K
© Copyright 2004-2008 ABB. All rights reserved.
2. Remove the end cover on the USB memory and connect
it to the connector.
Do not disconnect the USB memory approx. 10 seconds
after connecting it.
The USB memory and its
contents may now be
accessed from the computer
unit just as any other hard
drive unit.
3.
CAUTION!
CAUTION!
Handling of USB memory is described in Operating
manual - IRC5 with FlexPendant, section File Managing.
Action Info/illustration
Continued
To Next Page
Loading...
