Agilent Technologies 5DX Service Guide

Agilent 5DX Service Guide 5-45
5DX Series 3 Digital I/O Assembly
SMEMA SRI -
Panel In
Available
SMT Communication:
SMEMA SRI Panel from
Upstream System
Available is False/True
The upstream
equipment
has a panel
ready to send
to the 5DX.
The upstream
equipment
does not have
a panel to
send to the
5DX.
36
SMEMA TRI -
Output Ready
SMT Communication:
SMEMA TRI
Downstream System
Ready to Accept is
False/True
The
downstream
equipment is
ready to
accept a
panel from
the 5DX.
The
downstream
equipment is
not ready to
accept a
panel from
the 5DX.
38
Rear Laser
Ready
Lights/Lasers: Rear
Laser Ready/Not Ready
The laser is
ready.
The laser is
not ready.
(*This laser
is an option,
the LED will
be off if this
laser is not
present.)
39
X-ray Tube
Pressure OK
-- The pressure
in the X-ray
tube is at a
reasonable
level.
The pressure
in the X-ray
tube is too
low.
40
Left Outer
Barrier Open
Panel Transport: Right
Outer Barred is
Closed/Open
The left outer
barrier is
open.
The left outer
barrier is not
open.
41
Right Outer
Barrier Open
Panel Transport: Right
Outer Barred is
Closed/Open
The right
outer barrier
is open.
The right
outer barrier
is not open.
42
Right Outer
Barrier Clear
Panel Transport: Right
Clear/Blocked Panel
Optical Sensor
The sensor is
clear.
The sensor is
blocked.
43
Front Laser
Ready
Lights/Lasers: Front
Laser Ready/Not Ready
The laser is
ready.
The laser is
not ready.
44
Table 5-7: Input Direct Current Relay Assignments
Description of
Input
Hardware Status and
Control
LED ON
Indicates
LED OFF
Indicates
Digit
al I/O
Bit

Agilent Technologies 5DX Specifications

General

Brand	Agilent Technologies
Model	5DX
Category	Medical Equipment
Language	English