Selecting type ofSelecting type of
resultsresults
Studying a specificStudying a specific
resultresult
Selecting notationSelecting notation
If you have stopped measurement during the interval time, the measurement results of
the current interval are discarded. The log of the current interval is not displayed in BackBack
field.
In this case, result data are re-calculated excluding the data of the current interval
when the measurement is stopped. This causes that "Count" and "Ratio" displayed
after the measurement will be different from that of during measurement.
The sum of interval time (multiplied interval time by the number of back logs) may
not match the differential time between displayed time at left top and right top after
the measurement.
Open the middle drop-down menu in the top row of buttons to select which
results you want to display on the screen.
PerformancePerformance
FrameFrame
BurstBurst
Size DistributionSize Distribution
TransmitTransmit
Multi Stream TransmitMulti Stream Transmit
Multi Stream ThroughputMulti Stream Throughput
Multi Stream Frame LossMulti Stream Frame Loss
Multi Stream LatencyMulti Stream Latency
Multi Stream JitterMulti Stream Jitter
SyncESyncE
IEEE 1588v2IEEE 1588v2
802.3ah802.3ah
802.1ag/Y.1731802.1ag/Y.1731
FECFEC
Touch a specific cell in a result table to zoom in on the corresponding result
item. The CountCount and RatioRatio fields are displayed on a ZoomZoom tab page. A Time vs.Time vs.
StatisticsStatistics tab page is also available. Use the BackBack button or touch the zoom
filed to return to the statistics screen.
Selecting how results are displayedSelecting how results are displayed
Select the required notation for the results from the notation drop-down menu.
UnformattedUnformatted - e.g. 71892
SI prefixSI prefix - e.g. 71.892 k (k means "kilo")
EngineeringEngineering - e.g. 71.892E3
ScientificScientific - e.g. 7.1892E4
ResultsResults
Results are displayed according to your choice.
Performance
UtilizationUtilization
ThroughputThroughput
To Next Page
Loading...
