1212..66 Transporting and DisposalTransporting and Disposal
This section describes the precautions to observe when transporting and
disposing of the main frame at the end of its useful life.
1212..66..11 RepackagingRepackaging
Use the original shipping materials, or an approved optional transit case, when
repacking the unit for transport. Repack according to the following procedure
when the original shipping materials (or a transit case) are not available.
1. Procure a corrugated cardboard, wooden, or aluminum box large enough to
pack in cushioning material around the unit.
2. Wrap the main frame in some material such as plastic sheeting that will
prevent entry of dust and water.
3. Place the unit into the box.
4. Pack soft materials around the main frame so that it cannot slide around
inside the packing box.
5. Secure the outside of the box with packaging cord, adhesive tape, bands, or
other such implements.
1212..66..22 TransportingTransporting
In addition to preventing vibration as much as possible, transport under
conditions meeting the storage conditions outlined above.
Transporting MU100090ATransporting MU100090A
The MU100090A contains the parts which is damaged easily by vibration or
shock. Avoid putting the MU100090A directly on the carrying car etc. Take the
measures against vibration and shock such as wrapping with cushioning.
1212..66..33 DisposalDisposal
When the Network Master has reached the end of its useful life, dispose of it in
accordance with local environmental regulations. Before disposal, dismantle or
physically destroy any non-volatile memory media in the Network Master to
ensure that data in memory cannot be recovered by third parties.
To Next Page
Loading...
