Test TimeTest Time
1010..22 GPSGPS
GPS application logs NMEA format data received from the GPS receiver. According to
the NMEA format data, the locations of satellite are displayed on the chart.
1010..22..11 Test SetupTest Setup
When you go to the test setup of the GPS application, the following screen is
displayed.
Select the how to stop the test.
Log until buffer is fullLog until buffer is full: The test stops when the buffer memory is full with the
log data. It takes around 13 hours to fill the buffer.
Timed (or until buffer is full)Timed (or until buffer is full): The test stops when the specified time has
elapsed or when the buffer memory has become full.
Days, Hours, MinutesDays, Hours, Minutes
Touch the field to set the test time.
1010..22..22 Test ResultsTest Results
When you go to the test result of the GPS application, the following screen is
displayed.
To Next Page
Loading...
