EasyManua.ls Logo

Anritsu MT1000A - Maintenance, Cleaning, and Storage

Anritsu MT1000A
605 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1212..11 Maintenance and CleaningMaintenance and Cleaning
This section contains information about general maintenance and cleaning of
the Network Master.
1212..11..11 MaintenanceMaintenance
The Network Master does not require any regular adjustments.
Using the Network Master in a normal environment and under normal
conditions will not call for general maintenance.
WARNINGWARNING
There are no user-serviceable parts in the Network Master. Possible There are no user-serviceable parts in the Network Master. Possible service orservice or
repair should be performed by Anritsu authorized personnel only.repair should be performed by Anritsu authorized personnel only.
1212..11..22 CleaningCleaning
From time to time the Network Master needs to be cleaned. The surfaces of the
Network Master can be cleaned with any mild detergent that does not contain
solvents.
Before any cleaning, please take notice of the warnings below:
WARNINGWARNING
Disconnect the Network Master from the mains power connection before anyDisconnect the Network Master from the mains power connection before any
cleaning involving fluid.cleaning involving fluid.
Only use a soft cloth moisturized with a mild detergent to clean the surface of
the touch screen.
Clean the main power adapter regularly. If dust accumulates around the power
pins, there is a risk of fire.
Keep the cooling fan clean so that the ventilation holes are not obstructed. If
the ventilation is obstructed, the cabinet may overheat and catch fire.
1212..11..33 StorageStorage
Wipe off dust, fingerprint marks, stains, spots, etc. from the surface of the
Network Master before storing it. Avoid storing the Network Master in these
places
In direct sunlight for extended periods
Outdoors
In excessively dusty locations
Where condensation may occur
In liquids, such as water, oil, or organic solvents, and medical fluids, or places
where these liquids may adhere
In salty air or in place chemically active gases (sulfur dioxide, hydrogen
sulfide, chlorine, ammonia, nitrogen dioxide, or hydrogen chloride etc.) are
present
Where toppling over may occur
SupportSupport
576576

Table of Contents

Other manuals for Anritsu MT1000A

Related product manuals