Anritsu MT1000A - Environment Performance

Return LossReturn Loss
Jitter generationJitter generation
Jitter ToleranceJitter Tolerance
Rx Bit Rate counterRx Bit Rate counter
1PPS Phase1PPS Phase
ComparisonComparison
Battery operating timeBattery operating time
2M to 139/45/156M Input
Bit Rate Refer to Bit Rate.
Code/Interface 2.048,34.368 Mbit/s HDB3, BNC 75 Ω
(Balance) 44.736 Mbits/s B3ZS, BNC 75 Ω
139.264,155.52 Mbits/s CMI, BNC 75 Ω
Sensitivity
(2.048Mbit/s)
TERMINATE:
Up to 40 dB cable attenuation, nominal impedance
MONITOR:
20 dB to 26 dB linear attenuation and up to 6 dB cable
attenuation, nominal impedance
20 dB to 30 dB linear attenuation, 0 dB cable attenuation,
nominal impedance
BRIDGED:
Up to 40 dB cable attenuation, high impedance
Sensitivity
(34.368/44.736Mbit/s)
TERMINATE:
Up to 12.0 dB cable attenuation, nominal impedance
MONITOR:
20 dB linear attenuation and up to 12 dB cable attenuation,
nominal impedance
20 dB to 30 dB linear attenuation , 0 dB cable attenuation,
nominal impedance
Sensitivity
(139.264/155.52Mbit/s)
TERMINATE:
Up to 12.0 dB cable attenuation, nominal impedance
MONITOR:
20 dB linear attenuation and up to 12 dB cable attenuation,
nominal impedance
10/100 /1000M Input
Bit Rate Refer to Bit Rate.
Code/Interface
RJ-45
IEEE802.3-2008 10BASE-T, 100BASE-TX, 1000BASE-T compliant
ITU-T G.703 compliant
Optical interface: ITU-T G.783 compliant
Electrical interface: ITU-T G.823, ANSI T1.403, ANSI T1.404 compliant
Optical interface: ITU-T G.825, ITU-T G.8251 compliant
Electrical interface: ITU-T G.823, ITU-T G.824 compliant
Bit Rate Refer to Bit Rate.
Accuracy According to the Internal Clock of MT1000A.
Compares the phase between Ref 1PPS Input from AUX I/O and 1PPS Input
when MT1000A-005 and MU100090A are combined.
Accuracy: ±5 ns
1111..22..33 Environment PerformanceEnvironment Performance
Operating time: 4 hours (Typ.)
25°C, Depending on operating condition
MU100010A 10G Multirate ModuleMU100010A 10G Multirate Module
527527