For operation, refer to Control in "BERT" section.
99..44..22..22 ThresholdsThresholds
Touching the ThresholdsThresholds button in the navigation area displays the following
screen.
The FollowFollow button appears when the Port 2 settings can follow Port 1.
TransportTransport settings appear if the FC signal is carried by OTN.
For operation of Fibre ChannelFibre Channel and TransportTransport, refer to Thresholds in BERT
section.
99..44..33 Test ResultsTest Results
99..44..33..11 SummarySummary
When you go to the test results of the Fibre Channel Reflector application, the
following screen is displayed.
To Next Page
Loading...
