Test signal interfaceTest signal interface
SimultaneousSimultaneous
Measurement PortMeasurement Port
1111..33..22 External InterfacesExternal Interfaces
CFP4: 1 Slot (Port 1)
CFP MSA CFP4 Hardware Specification, Rev. 1.1 compliant
CFP MSA Management Interface Specification V2.2 R06a
compliant (excluding MSA 100GLH support)
IEEE 802.3ba-2010 compliant
QSFP28/QSFP+: 1 Slot (Port 1)
SFF-8436, SFF-8472 compliant
IEEE 802.3ba-2010 compliant
SFP/SFP+/SFP28:2 Slots (Port 1, Port 2)
SFF-8665, SFF-8431, SFF-8472 compliant IEEE 802.3ae-2002,
IEEE802.3-2008 compliant
RJ45: 2 Sockets (Port 1, Port 2)
IEEE802.3-2008 10BASE-T, 100BASE-TX, 1000BASE-T compliant
Auto MDI-X
10/100 Mbps Full/Half Duplex, 1000 Mbps Full Duplex
2 ports
SFP/SFP+ and RJ45 interfaces can be selected under following condition:
Port 1: Selectable one slot from SFP/SFP+ and RJ45 slots (CFP4,
QSFP28/QSFP+, and SFP28 are not supported)
Port 2: Selectable one slot from SFP/SFP+ and RJ45 slots
To Next Page
Loading...
