22..44 Measurement CablesMeasurement Cables
When connecting the Network Master to the line to be tested or monitored, it is
recommended always to use shielded cables of good quality, to avoid the
possibility of corrupting the measuring results. For the same reason, the AC
adapter, if used, should be connected to the instrument and switched on before
starting the measurement.
For connection of the Network Master to different types of equipment, different
cables are available. Please contact your Anritsu representative for information.
22..44..11 Connecting Measurement CablesConnecting Measurement Cables
Measurement cables are connected to the input and output connectors located
on the connector panel of the instrument. Various electrical and optical
connectors are available.
To Next Page
Loading...
