Anritsu MT1000A - Physical Port Setup

Port modePort mode
OBSAI Line bit ratesOBSAI Line bit rates
Bit Rate Bit Rate
(MBaud)(MBaud)
Multiplexer × Multiplexer ×
Base bit rate (MBaud)Base bit rate (MBaud)
768 1 × 768
1536 2 × 768
3072 4 × 768
6144 8 × 768
The CPRI/OBSAI uses the optical ports.
MU100010A Connector PanelMU100010A Connector Panel
MU100011A Connector PanelMU100011A Connector Panel
88..11..11 Physical Port SetupPhysical Port Setup
When the port is set up with a CPRI/OBSAI interface, touching the PortPort button
in the navigation area will display the following screen.
This screen allows you to specify the physical port configuration of the
currently selected CPRI/OBSAI port. It can also be used to inspect the current
status of the selected port.
Select the port mode from the drop-down menu. The possible values are:
OffOff: The transmission will be disabled.
CPRI/OBSAI Setup and StatusCPRI/OBSAI Setup and Status
449449