1212..1010 CE Conformity MarkingCE Conformity Marking
Anritsu affixes the CE conformity marking on the following product(s) in
accordance with the Decision 768/2008/EC to indicate that they conform to
the EMC, LVD, and RoHS directive of the European Union (EU).
CE marking
1212..1010..11 Product ModelProduct Model
Model:
MT1000A Network Master Pro
1212..1010..22 Applied DirectiveApplied Directive
EMC:
Directive 2014/30/EU
LVD:
Directive 2014/35/EU
RoHS:
Directive 2011/65/EU
1212..1010..33 Applied StandardsApplied Standards
EMC:
Emission: EN 61326-1: 2013 (Class A)
Immunity: EN 61326-1: 2013 (Table 2)
StandardStandard Performance Criteria*Performance Criteria*
IEC 61000-4-2 (ESD) B
IEC 61000-4-3 (EMF) A
IEC 61000-4-4 (Burst) B
IEC 61000-4-5 (Surge) B
IEC 61000-4-6 (CRF) A
IEC 61000-4-8 (RPFMF) A
IEC 61000-4-11 (V dip/short) B, C
*: Performance Criteria
A. The equipment shall continue to operate as intended during and after
the test. No degradation of performance or loss of function is allowed
below a performance level specified by the manufacturer, when the
equipment is used as intended. The performance level may be replaced
by a permissible loss of performance. If the minimum performance
level or the permissible performance loss is not specified by the
manufacturer, either of these may be derived from the product
description and documentation and what the user may reasonably
expect from the equipment if used as intended.
B. The equipment shall continue to operate as intended after the test. No
degradation of performance or loss of function is allowed below a
performance level specified by the manufacturer, when the equipment
To Next Page
Loading...
