RxRx
TxTx
This screen presents detailed information about the current physical status of
the optical signal.
Signal LevelSignal Level
Shows the input level of an optical signal. A lamp icon indicates the LOS state.
FrequencyFrequency
Shows the input signal frequency and the deviation of the input signal from the
nominal bit rate in ppm.
Signal LevelSignal Level
Shows the output level of an optical signal.
FrequencyFrequency
Shows the output signal frequency and the deviation of the output signal from
the nominal bit rate in ppm.
77..11..33..33 Alarms and ErrorsAlarms and Errors
Touching the middle summary box in the status area of the Ports SetupPorts Setup screen
displays the status shown below.
To Next Page
Loading...
