EasyManua.ls Logo

Anritsu MT1000A - Page 44

Anritsu MT1000A
605 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Touch Shut DownShut Down and then confirm by touching YesYes in a dialog box.
AC OperationAC Operation
After you shut the Network Master down, the Network Master goes back to
Stand by or Charging state.
The Network Master stays Stand by or Charging state until you disconnect the
mains power adapter.
Battery OperationBattery Operation
After you shut the Network Master down, the power goes off.
Forcing power OFFForcing power OFF
If it is not possible to power down the Network Master using the power button
menu, the following procedure can be used to make an emergency power
down.
1. Disconnect AC adapter if it is connected.
2. Hold the Power button depressed for a couple of seconds.
It is not recommended to force a power-off except in emergencies.
Additional options in power button menuAdditional options in power button menu
Apps SwitcherApps Switcher
Shows all currently activated applications and allows you to switch among
them.
Capture ScreenCapture Screen
Saves a screen shot image in .PNG format. The image file will be saved in
'Internal/screens' folder or an attached USB memory stick.
Lock ScreenLock Screen
Locks or unlocks the screen.
Human-Machine-InterfaceHuman-Machine-Interface
4444

Table of Contents

Other manuals for Anritsu MT1000A

Related product manuals