APSAPS
If selecting check box, Port setup is changed as following:
Content: CPRI Link
Error insertion item: LCV
The check box will be cleared if Content has changed to other options.
ThresholdThreshold
Allows you to specify a threshold value of Round Trip Delay in micro seconds
(μs).
88..22..22..33 APSAPS
Touching the APSAPS button in the navigation area displays the screen to setup the
APS test.
Select the check box for executing APS test during BER measurement.
Reference eventsReference events
Select the check box of AlarmsAlarms, ErrorsErrors or Remote alarmsRemote alarms for setting to
reference event.
Error free periodError free period
If a reference event is not generated within the time of this cycle, end the
switching time measurement.
ThresholdThreshold
Allows you to specify a Pass/ Fail threshold value of switching time in
miliiseconds.
88..22..22..44 ThresholdsThresholds
Touching the ThresholdsThresholds button in the navigation area displays the following
screen.
To Next Page
Loading...
