Enable BluetoothEnable Bluetooth: Enables using the Bluetooth.
Make visibleMake visible: Allows to discover Network Master from other Bluetooth devices.
Share files using FTPShare files using FTP: Allows to share files stored in Network Master via
Bluetooth. Login account and password are not required for the FTP
connection. Shared folder in Network Master is "/property/mnt/internal".
When the option is installed, this icon on Status bar indicates whether the
Bluetooth is enabled or disabled.
Remote ControlRemote Control
Allows you to change remote control options.
SCPI control TCP portSCPI control TCP port: Touch the field to set port number used for remote
control via Ethernet service interface.
GPIB AddressGPIB Address: Touch the field to set General Purpose Interface Bus (GPIB)
address.
Enable Remote ResetEnable Remote Reset: Selecting the check box allows users to reset the
Network Master from remote PC.
Allow remote PC connectionsAllow remote PC connections: If selecting check box, remote PC control via
Ethernet is available.
In-band control TCP portIn-band control TCP port: Touch the field to set a port number used for the
remote control via the test interface. Set a different number from the number
set at SCPI control TCP portSCPI control TCP port.
NicknameNickname: Touch the field to set a name of Network Master recognized by
Discovery that is the Ethernet application.
This icon on Status bar indicates whether the remote PC control is connected or
not.
VNCVNC
Allows remote control of the instrument via Virtual Network Computing (VNC).
This icon on Status bar indicates whether the VNC is enabled or disabled.
Touching this icon enables or disables the VNC alternately.
To Next Page
Loading...
