400HD Series IP Phones
Administrator's Manual 110 Document #: LTRT-11950
Parameter Description
No Answer Call Timeout
[voip/dialing/unanswered_call_timeout]
Timeout before the phone automatically sends a Cancel
message. When the phone makes a call and the other side
doesn't answer, the phone sends a Cancel after this
timeout. Range: 1 to 300. Default = 60.
[voip/dialing/on_hook_dialing]
Defines the dialing mode when phone is on hook and no
audio device is selected (when user enters digits on idle
state). Valid values are:
[Disable] = Ignore digits press. To initiate a call, users will
have to select audio device by pressing speaker or
headset keys or by picking headset.
[Open_default_audio_device] = default behavior – start
dialing via default audio device (usually speaker)
activated.
[Off_line_dialing] = don`t activate the default audio
device until pressing 'dial' , DTMF tones will not be heard
and dialing related features (such as 'dialing timeout' , 'dial
complete key' , and more) will be disabled.
[voip/dialing/allow_calling_self_extension]
If disabled (default), calling the self-number (user ID) will
be blocked.
If enabled, the phone will send the invite although it is for
its own extension. (In some proxies this is how you access
voice mail).
To Next Page
Loading...
