AudioCodes 420HD - Customizing the Phone; Changing the LCD Language

Administrator's Manual 3. Web Interface
Version 2.2.8 27 400HD Series IP Phones
3.3 Configuring the Web Interface's Port
This section shows how to assign a port number to the Web interface, using the
Configuration File.
 To configure the Web interface port using the Configuration File:
• Use the table below as reference.
Table 3-1: Web Interface - Port Parameters
Parameter Description
[system/http_server_port]
Assigns a port number to the Web interface.
The HTTP server by default uses port number 80.
Range: 0-65535.
[system/https_server_port]
Assigns a port number to the Web interface.
The HTTPS server by default uses port number 443.
Range: 0-65535.
3.4 Configuring User Login Credentials
This section shows how to configure the phone user's name and password.
 To configure the phone user's name and password using the Web interface:
1. Access the User Account page (Management menu > Administration > Users):
Figure 3-3: Web Interface - User Account
2. Configure using the table below as reference, and click Submit.
 To configure using the Configuration File:
• Use the table below as reference.
Table 3-2: User Name and Password Parameters
Parameter Description
Username
[system/web_user_name]
The phone user name. Default: admin.
Applies only to the Web interface.
Password
[system/web_user_password]
The encrypted phone password. Default: 1234.
Applies only to the Web interface, and LCD.