AudioCodes 420HD - Configuring FKS; Figure A-5: Web Interface - Services; Figure A-6: Web Interface - Services - Feature Key Synchronization; A.1.4 Configuring FKS

400HD Series IP Phones
Administrator's Manual 278 Document #: LTRT-11950
A.1.4 Configuring FKS
This section shows how to enable Feature Key Synchronization. Enabling it synchronizes the
DnD and Call Forward functionalities with the BroadSoft BroadWorks server. After activating
the feature, the DnD and Call Forward functionalities are performed by BroadWorks rather
than the IP phone. For more information on DnD functionality, see Section 23.8.
 To enable Feature Key Synchronization:
1. In the Web interface, open the Services screen (Configuration > Voice over IP >
Services).
Figure A-5: Web Interface - Services
2. From the 'Type' dropdown under the Application Server section, select the BSFT
(Broadsoft) option; the section extends to display the 'Feature Key Synchronization'
dropdown.
Figure A-6: Web Interface – Services - Feature Key Synchronization
3. From the 'Feature Key Synchronization' dropdown, select Enable, as shown in the
figure above, and then click Submit; the feature is now enabled.