AudioCodes 420HD - 38 Changing Administrator Login Credentials; Figure 38-1: Web Interface - Users - Administrator Account

Administrator's Manual 38. Changing Administrator Login Credentials
Version 2.2.8 229 400HD Series IP Phones
38 Changing Administrator Login Credentials
You can change the administrator phone's login user name and password. This is the login
required to access the Web interface and the phone LCD's Administration menu. The
default administrator user name and password is admin and 1234 respectively.
Administrator Login Credentials can be changed using the Web interface or Configuration
File.
 To change the administrator's login username and password using the Web
interface:
1. Access the Users page (Management tab > Administration menu > Users).
Figure 38-1: Web Interface – Users – Administrator Account
2. In the 'Username' field, enter a username.
3. In the 'Password' field, enter a new password, and then in the 'Confirm Password' field,
re-enter this new password.
4. Click Submit; a confirmation prompt appears.
5. Click OK.
 To change the login username and password using the configuration file:
• Use the table below as reference.
Table 38-1: Username and Password Parameters
Parameter Description
Username
[system/user_name]
The phone user name.
The default value is admin.
Note: This parameter is applicable only to the Web interface.
Password
[system/password]
The phone password is by default encrypted.
The default value is 1234.
To regenerate an encrypted password, see Section 4.6.2.
Note: This parameter applies to the Web interface, and to the LCD
display.