Administrator's Manual 14. Configuring IP Network Settings
Version 2.2.8 77 400HD Series IP Phones
14 Configuring IP Network Settings
The following section shows how to configure IP Network Settings including:
Static IP Address
Partial DHCP
14.1 Configuring Static IP Address
The static IP address can be configured using the following:
Phone LCD
Web interface and Configuration File
14.1.1 Configuring Static IP Address using the Phone's LCD
This section shows how to configure Static IP Address on the phone using the phone's LCD.
The LAN connection interface can be manually defined (static IP address) or automatically
provisioned using a DHCP server from where the LAN IP address is obtained.
To configure the phone's LAN connection type:
1. Access and select the LAN Connection Type option (MENU key > Administration >
Network Settings).
2. Navigate to and select Static IP or Automatic IP (DHCP) IP addressing scheme.
3. If you select Static IP, continue with the next step (Step 4); else skip to Step 5.
4. Define a static IP addressing scheme:
a. Press the Edit softkey; the Static IP screen appears:
b. To configure each required network parameter, i.e., IP Address, Netmask,
Gateway, Primary DNS and Secondary DNS, navigate to and choose the
parameter, and then press the Edit softkey, for example, navigate to IP Address
and press the Edit softkey:
c. Enter the new address in dotted-decimal notation, using the following keys:
♦ Navigation control: moves the cursor left or right in the IP address
To Next Page
Loading...
