Administrator's Manual A. Configuring Phones in Server-Specific Deployments
Version 2.2.8 281 400HD Series IP Phones
Figure A-9: BroadSoft Server – Shared Call Appearance Add
Table A-3: BroadSoft Server - Shared Call Appearance Add
Parameter Description
Identity/Device Profile Name See BroadSoft's documentation for detailed information.
From the dropdown, select the Identity/Device Profile Type
you configured previously.
Line/Port Enter the required SIP register address-of-
(shown in the figure above):
2421114099@as.iop1.broadworks.net
Enable this location Select this option to enable this user station.
Allow Origination from this location Select this option to allow calls to be made from this user
station.
Allow Termination to this location Select this option to allow calls to be received at this user
station.
5. In the Web interface, access the Line Settings page (Voice Over IP > Line Settings)
and from the 'Line 1 Mode' dropdown, select Shared (line).
Figure A-10: Web Interface – Line Settings - Shared Line
To Next Page
Loading...
