400HD Series IP Phones
Administrator's Manual 174 Document #: LTRT-11950
The corporate directory file includes a list of contacts and their phone numbers.
The syntax of the corporate directory file must be as follows:
<full name>,<office>,<home>,<mobile>
For example:
John Smith,1234,98765432,574685746
If not all phone numbers are required, the relevant field must be left empty. For example, in
the directory entry below, the home and user-defined numbers are absent:
John Smith,1234,,574685746
To configure the Corporate Directory using the Web interface:
1. Prepare the file as explained above.
2. Access the Directory page (Configuration tab > Personal Settings menu >
Directory).
3. Click Browse and select the file to upload.
4. Click Load Corporate Directory.
Figure 25-2: Web Interface - Corporate Directory
5. Configure the Corporate Directory settings according to the parameters in the table
below, and then click Submit.
To configure the Corporate Directory using the Configuration File:
• Use the table below as reference.
Table 25-2: Provisioning Parameters
Parameter Description
provisioning/corporate_directory_uri The URI for retrieving the corporate directory. The corporate
directory must be included in a separate file to be loaded to
the phone during provisioning.
For example:
provisioning/corporate_directory_uri=corporate_dir.txt
Note:
The corporate directory file is loaded after boot up and
after that, periodically.
If the corporate directory file is new, the phone updates
the information and does not reboot.
To Next Page
Loading...
