Administrator's Manual 2. IP Phone User Interface
Version 2.2.8 23 400HD Series IP Phones
2 IP Phone User Interface
The IP phone provides a Liquid Crystal Display (LCD) based screen, offering an intuitive,
menu-driven interface for configuring the phone. The administrative tasks are performed in
the phone's Administration menu.
Note: Screenshots of the 440HD model's LCD are shown in this document. Screenshots
of the 420HD and 405 model LCDs are only shown if they significantly differ.
2.1 Accessing the Administration Menu
This section shows how to access the Administration menu from the IP phone LCD.
Note:
• The phone is password protected. The default password is 1234. To change the login
password, use the phone's Web interface or Configuration file.
• After entering the password, the access session is applied to all the submenus.
• To change the Administration menu's login password, use the phone's Web
interface (see Section 38 on page 229), or use the configuration file.
To access the Administration menu:
1. In idle display, press the MENU key on the phone; the Menu list is displayed. Navigate
down to the Administration option.
Note: After pressing the MENU key, you can press the number of a menu item to directly
open it. For example, after pressing the MENU key, you can press the 6 key on the
phone to directly open the item.
2. Press the Select softkey; you are prompted for a password.
3. Enter your password, and then choose OK. When entering the password, you can
change between numerals and letters by pressing pound (#).
To Next Page
Loading...
