AudioCodes 420HD - Figure 23-6: Web Interface - Services - Dnd; Table 23-8: Do Not Disturb Parameters; Configuring Do Not Disturb (Dnd)

400HD Series IP Phones
Administrator's Manual 146 Document #: LTRT-11950
23.8 Configuring Do Not Disturb (DnD)
The Do not Disturb (DnD) feature can be configured using the Web interface or Configuration
File. It can also be configured in BroadSoft's BroadWorks (see under Appendix A.1.3).
 To configure DnD using the Web interface:
1. Access the Services page (Configuration tab > Voice Over IP menu > Services).
Figure 23-6: Web Interface - Services - DnD
2. Configure using the table below as reference, and then click Submit.
 To configure DnD using the Configuration File:
• Use the table below as reference.
Table 23-8: Do Not Disturb Parameters
Parameter Description
Enable
[voip/services/do_not_disturb/enabled]
Enables the DnD feature.
 [0] Disable
 [1] Enable (default)
Activate
[voip/line/%d/do_not_disturb/activated]
Activates the DnD feature per phone line, if the
parameter 'voip/services/do_not_disturb/enabled' is
enabled.
 [0] - Activate (default)
 [1] - Deactivate
Three DnD configurations are possible in phones' idle
screens: (1) If DnD is disabled, no notification will be
displayed (2) If DnD is enabled for one line extension,
one notification is displayed (3) If DnD is configured
for two line extensions, two notifications are
displayed.
Note: DnD can also be activated using the LCD
screen interface (more common).
 To configure DnD in the phone's LCD:

Refer to the User's Manual for detailed information.