AudioCodes 420HD - Configuring Additional Function Keys

Administrator's Manual 26. Configuring Keys
Version 2.2.8 179 400HD Series IP Phones
Table 26-2: 440HD Phone Function Keys Parameters
Parameter Name Description
Key
[personal_settings/functional_key/n-n/key_label]
Used to define a label for a key.
Type
[personal_settings/functional_key/n-n/type]
Choose either SPEED_DIAL (default) -or-
SPEED_DIAL_BLF. The speed-dial feature helps
users quickly dial numbers that are often used or
hard to remember.
PAGING
When the Paging feature is enabled, you can define
Paging Groups (see Section 27).
Number
[personal_settings/functional_key/n-n/speed_dial_number]
The telephone number which the speed dial dials.
The speed-dial feature helps users quickly dial
numbers that are frequently used or that are hard to
remember.
Note: The first Web page shows Function Keys 1-12 (0-11 in the configuration file). The
second Web page shows 18-27 (17-27 in the configuration file). The third Web page
shows 28-38 (27-37 in the configuration file).
26.1.3 Configuring Additional Function Keys
Note: Applies only to the 440HD phone model.
You can configure more than 12 Function Keys using the Web interface or the Configuration
File.
Note the following when configuring more than 12 Function Keys:

In a BroadSoft environment, a total of 33 Speed Dials+BLFs can be configured. The 33
SDs+BLFs are configured on pages 1, 2 and 3 of the phone's BLF sidecar. Users define
12 SDs+BLFs and then when defining the 13
th
, the 12
th
SD+BLF shows Next and the
name in the 12
th
moves to the 13
th
.

In all other environments, pages 2 and 3 can be configured as SDs only, without BLF
functionality. Only page 1 allows SD+BLF.

In the Web interface, the 'Page' dropdown lets you navigate to page 2 and 3.