Administrator's Manual 40. Restoring Phone Defaults
Version 2.2.8 233 400HD Series IP Phones
40 Restoring Phone Defaults
Phone default settings can be restored from the phone's LCD or using the Web interface.
40.1 Restoring Factory Defaults from the Phone's LCD
This section shows how to restore factory defaults from the phone's LCD.
To restore the phone to default settings:
1. In the phone's LCD, access the Restore Defaults submenu (MENU key >
Administration menu > Restore Defaults).
2. Press the Select softkey; a warning message appears requesting you to confirm:
3. Press the Yes softkey to confirm reset to defaults or No to cancel.
Note: You can restore the phone's settings to their defaults without needing access to
the 'Administration' menu or (2) administrator access to the Web interface.
To restore the phone's settings to their defaults if necessary:
1. Long-press the OK and MENU keys simultaneously and while pressed, unplug the
power cable.
2. Plug the power cable back into the phone and continue to press the OK + MENU keys
for +-5 seconds as the boot process starts after connecting the power supply.
3. Release the OK + MENU keys; the phone' settings are restored to their defaults.
To Next Page
Loading...
