AudioCodes 420HD - 440 HD Phone; Figure 26-2: 440 HD Phone Web Interface - Personal Settings - Function Keys

400HD Series IP Phones
Administrator's Manual 178 Document #: LTRT-11950
2. Configure a Function Key using the table below as reference.
Table 26-1: 430HD Phone Function Keys Parameters
Parameter Name Description
Key
[personal_settings/functional_key/0-11/key_label]
Used to define a label for a key.
Type
[personal_settings/functional_key/0-11/type]
Choose either:
SPEED_DIAL (default) -or-
SPEED_DIAL_BLF
The speed-dial feature helps users quickly dial
numbers that are often used or hard to remember.
PAGING
When the Paging feature is enabled, you can
define Paging Groups (see Section 27).
Number
[personal_settings/functional_key/0-11/speed_dial_number]
The telephone number which the speed dial dials.
The speed-dial feature helps users quickly dial
numbers that are frequently used or that are hard
to remember.
26.1.2 440HD Phone
A total of 33 Function Keys can be configured on the 440HD phone. Of these, you can
configure up to 12 Function Keys as Speed Dials+BLFs. When more than 12 Function Keys
are configured, these keys can only be assigned as regular Speed Dials or for Multicast
Paging (see Section 27). You can scroll to additional pages to define these keys (see
Section 26.1.3).
 To configure Function Keys as Speed Dials+BLFs in the Web interface:
1. Open the Function Keys page (Configuration tab > Personal Settings menu >
Function Keys).
Figure 26-2: 440HD Phone Web Interface – Personal Settings - Function Keys
2. Configure Function Keys using Table 26-2 as reference.