Administrator's Manual 3. Web Interface
Version 2.2.8 25 400HD Series IP Phones
3 Web Interface
This section describes the phone's Web interface. You can use the Web interface to
configure the device.
3.1 Accessing Web Interface
You can use any standard Web browser (such as Microsoft Internet Explorer) to access the
phone's Web interface. The IP address used for accessing the Web interface is the phone's
IP address, received from a DHCP server or manually configured (static IP address).
To access the phone's Web interface:
1. Connect the LAN port of your phone to the IP network (using the Cable or ADSL modem
from your Internet Service Provider).
2. Determine the phone's IP address obtained from the DHCP server, using the phone's
LCD screen as described in Section 41 on page 237 (in the 'IP Address' field).
3. Open a Web browser, and then in the URL address field, enter the phone's IP address
(for example, http://192.168.1.2 or https://192.168.1.2), as displayed below:
The Web login window appears:
Figure 3-1: Web Interface Login
Note: The administrator's default login user name and password are admin and 1234
respectively. To change login credentials, see Section 38 on page 229.
4. Alternatively, if your DHCP and DNS servers are synchronized, you can access the
phone Web browser by using the following method:
http://<Phone Model>-<MAC Address>.<Domain Name>
E.g. http://440hd-001122334455.corp.YourCompany.com
5. Enter the User name and Password, and then click OK.
To Next Page
Loading...
