AudioCodes 420HD - 52 Configuring Port Mirroring; Figure 52-1: Web Interface -Port Mirroring

Administrator's Manual 52. Configuring Port Mirroring
Version 2.2.8 267 400HD Series IP Phones
52 Configuring Port Mirroring
Traffic on the phone's LAN port can be duplicated on its PC port in order to record calls,
analyze traffic, and troubleshoot issues.
This port mirroring feature can be configured using the Web interface or configuration file.
 To configure port mirroring using the Web interface:
1. Access the Recording page (Configuration tab > Network Connections menu > Network
Settings).
Figure 52-1: Web Interface –Port Mirroring
2. Configure port mirroring according to the parameters in the table below, and then click
Submit.
 To configure port mirroring using the configuration file:
• Use the table below as reference.
Table 52-1: Port Mirroring Parameters
Parameter Description
Activate
[network/pc_port_mirroring/enabled]
Enables port mirroring.
 [0] Disable (default) - LAN/PC network interfaces
operate in SWITCH mode.
 [1] Enable - LAN/PC network interfaces operate in
HUB mode. The network traffic on the LAN port is
reflected in the PC port.