AudioCodes 420HD - Configuring Proxy and Registration; Figure 17-2: Web Interface - SIP Proxy and Registrar; Table 17-2: Proxy and Registrar Parameters

Administrator's Manual 17. Configuring SIP Settings
Version 2.2.8 93 400HD Series IP Phones
17.2 Configuring Proxy and Registration
This section shows how to configure Proxy and Registration settings using the Web interface
or Configuration File.
 To configure Proxy and Registration using the Web interface:
1. Access the Signaling Protocol page (Configuration tab > Voice Over IP menu >
Signaling Protocols).
Figure 17-2: Web Interface - SIP Proxy and Registrar
2. Configure Proxy and Registration parameters using the table below as reference, and
then click Submit.
 To configure Proxy and Registration using the Configuration File:
• Use the table below as reference.
Table 17-2: Proxy and Registrar Parameters
Parameter Description
Use SIP Proxy
[voip/signalling/sip/use_proxy]
Determines whether to use a SIP Proxy
server.
 [0] Disable (default)

[1]
Enable
[voip/signalling/sip/proxy_address]
The IP address or host name of the SIP proxy
server. Default: 0.0.0.0
Proxy Port
[voip/signalling/sip/proxy_port]
The UDP or TCP port of the SIP proxy server.
Range: 1024 to 65535. Default: 5060.