AudioCodes 420HD - Making Calls; Dialing Numbers and URLs; Redialing

400HD Series IP Phones
Administrator's Manual 50 Document #: LTRT-11950
Parameter Description
Every (Check Period = Day)
[provisioning/period/weekly/day]
The day in the week for automatically checking for new
firmware and configuration files.
 [Sunday] Sunday (default)
 [Monday] Monday
 [Tuesday] Tuesday
 [Wednesday] Wednesday
 [Thursday] Thursday
 [Friday] Friday
 [Saturday] Saturday
Note: This parameter is applicable only when type is
configured to weekly.
Every (Check Period = Weekly)
[provisioning/period/weekly/time]
The hour in the day for automatically checking for new
firmware and configuration files.
The format of this value is: hh:mm, where hh is hour
and mm is minutes. For example: 00:30
The default time is 00:00.
Note: This parameter is applicable only when type is
configured to weekly.
10.2.1 Provisioning using DHCP Option 160
Phones can get a provisioning URL from DHCP Option 160, 66/67 or 43. Option 160 has the
highest priority, following by Option 66/67, and then Option 43. DHCP Option 160 can be
configured using the Web interface.
 To configure DHCP Option 160 using the Web interface:
1. Access the Automatic Update page (Management tab > Automatic Update menu >
Automatic Provisioning).
Figure 10-2: Web Interface - Automatic Provisioning - DHCP Option 160
2. From the 'Provisioning Method' dropdown, select DHCP Option (Dynamic URL).
3. In the 'DHCP Option Value' field, enter 160.
4. Configure the remaining parameters, and then click Submit.
5. After reboot, confirm that the firmware and configuration files have been updated.