AudioCodes 420HD - Configuring Call Waiting; Figure 23-2: Web Interface - Services - Call Waiting; Table 23-2: Call Waiting Parameters

400HD Series IP Phones
Administrator's Manual 140 Document #: LTRT-11950
23.2 Configuring Call Waiting
Call Waiting can be configured using the Web interface or Configuration File.
 To configure call waiting using the Web interface:
1. Access the Services page (Configuration tab > Voice Over IP menu > Services).
Figure 23-2: Web Interface - Services - Call Waiting
2. Configure the Call Waiting parameters using the table below as reference, and then
click Submit.
 To configure call waiting using the Configuration File:
• Use the table below as reference.
Table 23-2: Call Waiting Parameters
Parameter Description
Activate
[voip/services/call_waiting/enabled]
Enables the Call Waiting feature.
 [0] Disable

[1]
Enable (default)
Call Waiting SIP Reply
[voip/services/call_waiting/sip_reply]
Determines the SIP response that is sent when another
call arrives while a call is in progress:
 [RINGING]Ringing - 180 Ringing
 [QUEUED]Queued (default) - 182 Queued
Generate Tone
[/voip/services/call_waiting/generate
_tone/enabled]
Deternines whether the phone plays a call waiting tone:
 [0] The phone doesn’t play a call waiting tone.

[1]
The phone plays a call waiting tone (default).