AudioCodes 420HD - Adjusting Volume; Adjusting Ring Volume; Adjusting Tones Volume

Administrator's Manual 6. Configuring TR-069 Management
Version 2.2.8 37 400HD Series IP Phones
6 Configuring TR-069 Management
To connect to the remote management server, you must configure the phone's embedded
TR-069 client. TR-069 management can be configured using the Web interface or
Configuration File.
 To configure TR-069 using the Web interface:
1. Access the TR-069 page (Management tab > Remote Management menu > TR-069).
Figure 6-1: Web Interface - TR-069
2. Configure TR-069 parameters using the table below as reference, and then click
Submit.
 To configure TR-069 using the Configuration File:
• Use the table below as reference.
Table 6-1: TR-069 Management Parameters
Parameter Description
Activate
[management/tr069/enabled]
Enables TR-069.
 [0] Disable (default)
 [1] Enable
Note: This feature can be enabled only if the valid key
is provided in the 'feature key' field.
Activation Key
[management/tr069/activation_key]
Activation key to enable TR-069 management.
ACS URL
[management/tr069/acs_url]
URL for connecting the device to the ACS.
Note: This parameter must be in the form of a valid
HTTP or HTTPS URL.
User
[management/tr069/user_name]
Username used to authenticate the device when
making a connection to the ACS.
Password
[management/tr069/password]
Password used to authenticate the device when
making a connection to the ACS.
Request Connection User
[management/tr069/connection_request/
user_name]
Username to authenticate an ACS making a
Connection Request to the device.