AudioCodes 420HD - 28 Configuring Feature Key Synchronization

Administrator's Manual 28. Configuring Feature Key Synchronization
Version 2.2.8 197 400HD Series IP Phones
28 Configuring Feature Key Synchronization
This section shows how to configure Feature Key synchronization.
 To configure Feature Key synchronization using the Configuration File:
• Use the table below as reference.
Table 28-1: Feature Key Synchronization Parameters
Parameter Description
[system/feature_key_synchronization/enabled]
Disables/enables Feature Key synchronization.
[system/feature_key_synchronization/forward/
0-3/destination]
Forward destination. The number of the telephone to
which the call is made.
[system/feature_key_synchronization/status/0-
3/fks_status]
The status of the Feature Key synchronization.
Select:
 [FKS_NONE] (Default)
 FKS_DND]
 [FKS_CFA]
 [FKS_CFB] -or-
 [FKS_CFNA]