AudioCodes 420HD - Configuring CPT Regional Settings; Figure 19-2: Web Interface - Tones - Regional Settings; Table 19-2: Regional Parameters

400HD Series IP Phones
Administrator's Manual 120 Document #: LTRT-11950
19.2 Configuring CPT Regional Settings
It's important to match your phone's Call Progress Tones (CPT) to the country in which your
phone is located. This section shows how to configure it.
 To configure your region using the Web interface:
1. Access the Tones page (Configuration tab > Personal Settings > Tones).
Figure 19-2: Web Interface - Tones - Regional Settings
2. From the 'Current Location' drop-down list, select the country in which your phone is
located. Use the table below as reference.
3. Click Submit.
 To configure regional location using the Configuration File:
• Use the table below as reference.
Table 19-2: Regional Parameters
Parameter Description
Current Location
[voip/regional_settings/selected_country]
Defines the country in which your phone is located. The
behavior and parameters of analog telephones lines
vary between countries. CPTs are country-specific. The
phone automatically selects the correct regional settings
according to this parameter. Supported countries are:
 [Israel] Israel
 [China] China
 [France] France
 [Germany] Germany
 [Netherlands] Netherlands
 [UK] UK
 [Brazil] Brazil
 [Italy] Italy
 [Argentina] Argentina
 [Portugal] Portugal
 [Russia] Russia
 [Australia] Australia
 [USA] USA (Default)

[India]
India