AudioCodes 420HD - Uploading Ring Tones; Figure 19-3: Web Interface - Upload Ringing Tone

400HD Series IP Phones
Administrator's Manual 122 Document #: LTRT-11950
19.3 Uploading Ring Tones
New Ring Tones can be uploaded using the Web interface or Configuration File.
Note:
• The ring tone file must be in WAV file format (A/Mu-Law, 8-kHz audio sample rate and
8-bit audio sample size or PCM 16-kHz audio sample rate and 16-bit audio sample
size, Intel PCM encoding).
• For the phone to use an uploaded ring tone, select it in the phone's LCD (see the
phone's User's Manual).
 To upload a ring tone using the Web interface:
1. Access the Tones page (Configuration tab > Personal Settings menu > Tones).
Figure 19-3: Web Interface - Upload Ringing Tone
2. In the 'Ringing Tone Name' field, enter the name of the ring tone file to upload. If you do
not enter a name, the phone assigns the tone's file name (without the .wav file
extension) as the name of the tone.
3. Click the Browse button, navigate to the folder in which the ring tone file is located,
select the file, and then click Open; the file name and path is displayed in the 'File
Location' field.
4. Click Submit; the file is loaded to the phone and displayed in the Ring Tone Name list.
 To delete Ring Tones using the Web interface:
• Select the 'Delete' check boxes corresponding to the ring tone that you want to
delete, and then click Submit.