Administrator's Manual 16. Configuring VLAN Settings
Version 2.2.8 85 400HD Series IP Phones
16 Configuring VLAN Settings
You can configure VLAN settings using the Web interface or Configuration File.
To configure the phone's VLAN settings using the Web interface:
1. In the Web interface access the Network Settings page (Configuration tab > Network
Connections menu > Network Settings).
Figure 16-1: Web Interface - Network Settings - VLAN Settings
2. Configure the settings using the table below as reference, and then click Submit.
To configure the phone's VLAN settings using the Configuration File:
• Use the table below as reference.
Table 16-1: VLAN Settings
Parameter Description
VLAN Discovery Mode
[network/lan/vlan/mode]
Determines how VLAN is assigned to your IP phone, i.e., manually or
automatically, and if automatically, according to which protocol.
Disable [Disable]
Manual Configuration of VLAN [Manual] - If selected, the screen
extends to also display 'VLAN ID' and 'VLAN Priority' (see these
settings below) for static configuration of VLAN ID and priority. See
Section 16.1 below for a detailed explanation.
Automatic Configuration of VLAN (CDP) [CDP] - VLAN discovery
mechanism based on Cisco Discovery Protocol (CDP). See
Section 16.1 below for a detailed explanation.
Automatic Configuration of VLAN (LLDP) [LLDP] - VLAN
discovery mechanism based on LLDP. See Section 16.1 below for
a detailed explanation.
Automatic Configuration of VLAN (CDP+LLDP) [CDP_LLDP]
(default) - VLAN discovery mechanism based on LLDP and CDP.
LLDP is higher priority. See below for a detailed explanation.
Period
[network/lan/vlan/period]
The time period, in seconds, between discovery messages when
configured to CDP, LLDP or CDP+LLDP. The default value is 30.
To Next Page
Loading...
