AudioCodes 420HD - 30 Loading a Certificate; Loading the Trusted Root CA Certificate to the Phone; Loading Trusted Root CA Certificate Using Configuration File; Figure 30-1: Web Interface - Root CA Certificate

Administrator's Manual 30.Loading a Certificate
Version 2.2.8 205 400HD Series IP Phones
30 Loading a Certificate
This section shows how to:

Load the Trusted Root CA Certificate to the Phone (see below).

Load the Client Certificate to the Phone (see Section 30.2).

Generate a Certificate Signing Request (CSR) (see Section 30.3).
30.1 Loading the Trusted Root CA Certificate to the Phone
This section shows how to load the Trusted Root CA certificate to the phone.
 To load the trusted root CA certificate to the phone:
1. Open the Root CA Certificate page (Configuration tab > Security menu > Root CA
Certificate).
Figure 30-1: Web Interface – Root CA Certificate
2. Click Browse to navigate to the certificate file, and then click the Load button to upload
it to the phone.
You can load a maximum of five certificates to the phone. Click the Del button to delete
a load if necessary. Click the Display button to display the certificate if you wish to view
it.
30.1.1 Loading Trusted Root CA Certificate Using Configuration File
This section shows how to load a Trusted Root CA certificate using the configuration file.
Note: Using this method, Trusted Root CA certificates files are loaded to the phone
when it is powered up.
 To load a Trusted Root CA certificate file using the configuration file:
• Use the table below as reference.
Table 30-1: Root CA Certificate Parameters
Parameter Description
Root CA 1
[security/ca_certificate/0/uri=]
The first root CA certificate loaded to the phone.
Root CA 2
[security/ca_certificate/1/uri=]
The second root CA certificate loaded to the phone.
Root CA 3
[security/ca_certificate/2/uri=]
The third root CA certificate loaded to the phone.