AudioCodes 420HD - Selecting an Answering Device; Defining Location

Administrator's Manual 5. IP Phone Management Server
Version 2.2.8 35 400HD Series IP Phones
5 IP Phone Management Server
Administrators can provision an enterprise's IP phones using AudioCodes' IP Phone
Management Server. This section shows how to set up the IP Phone Management Server.
Note: For detailed information on using the IP Phone Management Server user interface
to provision phones, see the IP Phone Management Server Administrator's Manual.
 To configure the server using the Configuration File:
1. Open the Configuration File page in the Web interface (Management tab > Manual
Update > Configuration File).
2. Configure the server parameters using the table below as reference.
Table 5-1: IP Phone Management Server Parameters
Parameter Description
[ems_server/keep_alive_period]
The server sends a keep alive message at a configured
interval to verify that its link with the network is operating.
If no reply is received, the link is determined to be down
or not working.
Default: 60 seconds
[ems_server/provisioning/url]
Defines the URL of the EMS Server, for example,
http://10.1.8.23:8081
[ems_server/user_name]
Defines the username of the administrator who'll use the
EMS Server for provisioning, for example, John Smith.
[ems_server/user_password]
Defines the password (encrypted) of the administrator
who'll use the EMS Server for provisioning, for example,
{"Y6QYmP53BDkoTvuIFjEBuQ=="}