Administrator's Manual 17. Configuring SIP Settings
Version 2.2.8 89 400HD Series IP Phones
17 Configuring SIP Settings
You can configure the following SIP settings using the Web interface or Configuration File:
General
Proxy and Registration
SIP Timers
SIP QoS
17.1 Configuring General SIP Settings
The phone's General SIP settings can be configured using the Web interface or
Configuration File.
To configure general SIP settings using the Web interface:
1. Access the Signaling Protocols page (Configuration tab > Voice Over IP menu >
Signaling Protocols).
Figure 17-1: Web Interface - Signaling Protocols- SIP General
2. Configure the SIP General parameters using Table 17-1 below as reference, and then
click Submit.