AudioCodes 420HD - Configuring Navigation Control Button Positions; Figure 26-6: Web Interface - Navigation Keys

400HD Series IP Phones
Administrator's Manual 190 Document #: LTRT-11950
26.5 Configuring Navigation Control Button Positions
Note: This section applies to all phone models.
Each of the four positions of the Navigation Control button on the phone, i.e., Up, Down, Left,
and Right, as well as its OK button, can be configured to perform a one of five functions:

None (default)

Missed Calls

Received Calls

Dialed Calls

All Calls

Directory
For example, from the 'Navigation Control Up' key dropdown in the Navigation Keys section
of the page (see the figure below), select Missed Calls, and then click the Submit button;
the user will be able to press the upper rim of the Navigation Control button on their phone in
order to display the Missed Calls on the phone's LCD screen.
The OK button can also be configured to perform one of these five functions. A Delete option
adjacent to each Navigation Control key and adjacent to 'Ok Button' can be selected to
remove the function from the key/button.
 To configure navigation control button positions in the Web interface:
1. Open the Programmable Keys page (Configuration tab > Personal Settings
menu > Programmable Keys) and locate the Navigation Keys section.
Figure 26-6: Web Interface - Navigation Keys
2. From the 'Navigation Control Up' key dropdown, select (for example) Missed
Calls, and then click the Submit button; the user will be able to press the upper rim
of the Navigation Control button on their phone in order to display the Missed Calls
in the phone's LCD.
3. Optionally use the Delete checkbox adjacent to each Navigation Control key and
adjacent to 'Ok Button' to remove the function.